H-1130E Tub Grinder


WEIGHT
	Total	20,500 lbs (9,298.64 kg)
	Hitch (with conveyor folded)	4,700 lbs (2,131.88 kg)

TRANSPORT DIMENSIONS
	Width	11′ 4′ (3.45 m)
	Height	10′ 7″ (3.2 m)
	Length	24′ 11″ (7.59 m)

OPERATING DIMENSIONS
	Total Width	11′ 3″ (3.43 m)
	Total Width, Tub Raised	12′ 6″ (3.81 m)

CHASSIS FEATURES
	Towing Arrangement	Clevis hitch
	Tires	2) 16.5L X 16.1 (14 ply) High Flotation Implement Tires
	Wheels	(2) 16.1 X w14C – 8 Bolt, 6″ (15.24 cm) Pilot
	Bearings	Tapered roller

TUB FEATURES
	Loading Height	9′ 2″ (2.79 m)
	Tub Width at Flare	11′ 3″ (3.43 m)
	Depth	50″ (1.27 m)
	Tub Inside dia at Base	8′ 11″ (2.72 m)
	Tub Wall Thickness	12 gauge (2.66 cm)
	Tub Floor Thickness	10 gage (3.42 mm)

HAMMERMILL – HEAVY DUTY
	Length	50″ (127 cm)
	Diameter, Hammers Extended	26″ (66.04 cm)
	Feed Opening	28” x 52” (71.1 cm X 132.08 cm)
	Hammers	HD-1/2″ (12.7cm) A.B. Hardened Steel, Swing
	Number of Hammers	88
	Hammer Rods	1-1/4″ (31.75 mm), Case Hardened Steel
	Cylinder Plates	HD Mills, 1/2″ (12.7 mm) thick X 15.75″ (40.01 cm)
	Cylinder Shaft	3 1/2″ (8.98 cm) Stress Proof Steel
	Bearings	3 1/4″ (8.26 cm) Pillow Block
	Drive	PTO through Multiple V-Belts, 1,000 RPM, 1-3/8″ dia. 21 spline shaft, or 1-3/4″ dia. 20 spline shaft
	Screens	1/8″ (3.18 mm), 3/16″ (4.76 mm), or ¼” (6.35 mm) Thick and Various Hole Sizes from 1/8″ (3.18 mm) to 8″ (203.2 mm) – Must Order 2 Screens of Choice With Machine-Not Standard equipment

BELLY AUGERS
	Type	Twin 12″ (30.48 cm diameter – 4′-6″(1.37 m) long)
	Drive	Hydraulic

DISCHARGE CONVEYOR
	Type	Rubber Belt with Cleats
	Drive	Hydraulic
	Drive & Idler Roller Type	Rubber Lagged Drive, “Easy Clean” Idler
	Length	85001 (7.92 m)
	Width	24″ (60.69 cm)
	Maximum Conveyor Lift Height	18′ 6″ (5.64 m) @ 40 Degree Incline Conveyor Lift
	Conveyor Lift & Fold	Hydraulic

OPERATOR CONTROLS
	Tub Rotation	3 Position Hydraulic Valve; Clockwise, Stop, Counter Clockwise
	Tub Speed	DuraTech Model RCB93 Electronic Governor Stabilizes Engine Load by Adjusting Tub Rotation Speed
	Conveyor Lift	3-Position Hydraulic Valves for Raise, Hold and Lower
	Conveyor Fold	3-Position Hydraulic Valves for Fold, Hold and Unfold
	Conveyor On/Off	2-Position Hydraulic Valves for Forward/Off
	Tub Tilt	Tractor Hydraulic

REQUIREMENTS FOR OPERATION TRACTOR
	PTO Horsepower Required	200 HP (149.1 kw) to 315 HP (234.90 kw)
	Min. Hydraulic Output	8 gpm at 1,500 psi (30.3 lpm. x 10,345 kPa)
	Hydraulic Remote Controls	2- Double Acting Valves with Quick Coupler Outlets
	Electrical	12 VDC

ELECTRIC MOTORS
	300 HP (223.7 kw) Drive Motor, 10 HP (7.5 kw) Hydraulic Drive Voltages Available: 460V-60Hz, 380V-50Hz, 380V-60Hz, 575V-60Hz Electric Motors require three phase power – PLEASE CHECK WITH YOUR POWER SUPPLIER FOR THE PROPER VOLTAGE AND HZ FOR YOUR AREA

GRINDER
	Hydraulic Reservoir Capacity	60 gallons (227.13 L) of Hydraulic Oil (Mobile 423, CENEX Super HTB or Equivalent)
	Mill Grate Kit	This kit includes; 5 removable mill grates, and 6 removable slug bars for improved grinding performance in tough hay and stover

Call for Pricing

Similar Products

1150 Tub Grinder

1150GL Tub Grinder

1155 Tub Grinder

1155GL Tub Grinder

H-1000 Tub Grinder

H-1030 Tub Grinder

H-1130 Tub Grinder

107C – Seed Drill