| WEIGHT | ||
| Total | 32,350 lbs. (14,704.5 kg) | |
| TRANSPORT DIMENSIONS | ||
| Width | 10 ft (3.048 m) | |
| Height | 11 ft 6 in (3.51 m) | |
| Length | 31 ft (9.448 m) | |
| 7000 SERIES GRAPPLE LOADER | ||
| Boom Length | 29 ft. (8.85 m) | |
| Rotation | 270 degree | |
| Wide Reach Grapple | 8′ 4″ (2.54 m) | |
| ENGINE | ||
| Manufacturer | CATERPILLAR | |
| Model | C15 | |
| Type | In-line, 6 cylinder, 4 -Stroke Diesel | |
| Power Rating | 475 HP (354 kw) or 540 HP (403 kw) | |
| Bore | 5.4 in (137 mm) | |
| Stroke | 6.5 in (165 mm) | |
| Displacement | 983 cu. in. (14.6 L) | |
| Fuel System | Electronic Unit Injector | |
| Aspiration | Turbocharged and air to air aftercooling | |
| Compression Ratio | 16.25 : 1 | |
| Rotation (from flywheel end) | Counter-clockwise | |
| Engine Housing | A sealed enclosure with a rotary screen at the front that removes debris from the air prior to being drawn through the radiator. Air is directed around engine components to provide surface cooling and discourages dust buildup. Air exits out the bottom between the engine and right and left frame channels. 3 generous sized service access doors are provided on both the right and left sides. | |
| Radiator | Staggered Core with 7 fins per inch | |
| Cooling System | 9.2 gal. (34.8 L) | |
| Lube Oil System (refill) | 10 gal (38 L) | |
| Engine Air Induction | Clean air is drawn in front of radiator through an inline separator and dry type air filter with safety element. | |
| Engine Block Heater | 120V / 2000 watt | |
| FLUID COUPLING | ||
| Manufacturer | TRANSFLUID | |
| Model | Model KPTO-19 Fluid Coupling | |
| Type | Drain Type Fluid Coupling | |
| Charge Pump | Gear type | |
| Cooler | Oil to air, thermostatic controlled electric fan | |
| Features | Unloaded engine warm-up, smooth startup, shock and overload protection, absorbs vibrations, electric/hydraulic control valve | |
| Maintenance | Easy access oil filter and drain plug | |
| Fluid Capacity | 9.24 gal (35 L) | |
| HYDRAULIC SYSTEM | ||
| Cooler | Oil to Air, radiator mounted | |
| Pump | Gear type, 2 section, output is 25 & 15 gpm @ 2100 psi., engine mounted | |
| Control Valves | Electric/Hydraulic, 4 valves – 1) 4 spool, 2) single spool, and 1 proportioning | |
| Reservoir Capacity | 50 gallon (171 liter) | |
| Tub Tilt | 3 in x 30 in (7.62 x 76.2 cm) Hydraulic Cylinder | |
| Conveyor Lift | 2) 3 in x 36 in ( 7.62 x 91.44 cm) Hydraulic Cylinders | |
| Conveyor Fold | 2) 3 in x 30 in (7.62 x 76.2 cm) Hydraulic Cylinder | |
| Conveyor Articulation | 2) 2 in x 8 in (5.08 x 20.3 cm) | |
| CHASSIS FEATURES | ||
| Fire Suppression | 2) 20 lbs (9.09 kg) Fire Extinguishers, front mounted on the right and left side of the main frame |
|
| Fuel Capacity | Truck Dependent | |
| Lights | Clearance, Directional, and Brake | |
| Towing Arrangement | Truck Mounted | |
| Axle | Truck dependent | |
| Brakes | Truck dependent | |
| Tires | Truck dependent | |
| HAMMERMILL | ||
| Length | 50″ (127 cm) | |
| Diameter, Hammers Extended | 26″ (66.04 cm) | |
| Feed Opening | 25 in x 52 in (63.5 cm x 133 cm) | |
| Mill Feeding | Mill Grate | |
| Hammers | 1/2” (1.27 cm) AR-Hardened Steel , Swing | |
| Number of Hammers | 88 | |
| Hammer Rods | 1-1/4 in (31.75 mm) dia., Case Hardened | |
| Mill Plates | 1/2″ (1.27 cm) thick X 16″ (40.64 cm) dia. | |
| Mill Shaft | 4-1/2 in (114.3 mm), Stress Proof Steel | |
| Bearings | 4 in (101.6 mm), Pillow Block Bearings | |
| Drive | Direct from Fluid Coupling | |
| Screens | 1/8 in (3.18 mm), 3/16 in (4.76 mm), or 1/4 in (6.35 mm) thick and various hole sizes from 1/8 in (3.18 mm) to 8 in (203.2 mm) | |
| Screen Area | 2,781 sq. in. (7,063.75 sq. cm.) | |
| TUB FEATURES | ||
| Loading Height | 9 ft 6 in (2.89 m) | |
| Tub Width | 11 ft (3.35 m) | |
| Depth | 50 in. (127 cm) | |
| Tub Diameter at Base | 9 ft (2.74 m) | |
| Tub Wall Thickness | 12 gage (2.66 mm) | |
| Tub Floor Thickness | 1/4 in (6.35 mm) | |
| Drive Mechanism | Electro/Hydraulic | |
| Speed control | Electronic Governor | |
| Service Access | Tub opens to 90 degrees to the right side | |
| BELLY CONVEYOR | ||
| Type | Rubber Belt with 3/4 in (19.05 mm) cleats | |
| Width | 36 in (91.4 cm) | |
| Drive | Hydraulic | |
| Drive & Idler Rollers Type | “Easy Clean” | |
| STACKING CONVEYOR | ||
| Type | Rubber Belt with 1-1/2 in (38.1 mm) Cleats | |
| Drive | Hydraulic, Top driven | |
| Drive & Idler Roller Type | “Easy Clean” | |
| Length | 26 ft. (7.92 m) | |
| Width | 30 in. (76.2 cm) | |
| Max. Conveyor Discharge Height | 18 ft 3 in (5.56 m) | |
| Lift | Electric/Hydraulic | |
| Fold | Electric/Hydraulic | |
| Oscillation (50°) | Electric/Hydraulic | |
| OPERATOR CONTROLS CENTRAL COMMAND CONSOLE | ||
| Engine Functions | ||
| Battery Disconnect | Rotating key, switch with power off, lock, power on | |
| Ignition | Rotating key switch with lock, power on, start, run and power off | |
| Throttle | 3-position switch to increase rpm, hold rpm, and decrease rpm | |
| Emergency Engine Stop | 2-position switch, pull out to run and push in to stop | |
| Tub Grinder Functions | ||
| Hammermill | 2-position switch, pull out to engage and push in to disengage 2-position safety switch, push and hold until hammermill begins to spin |
|
| Conveyor Lift | 3-position switch to raise, hold, & lower | |
| Conveyor Oscillation | 3-position switch for right, hold, & left | |
| Conveyor Storage | 3-position switch to fold, hold or to unfold | |
| Belly & Discharge Conveyor | 2-position switch to engage and disengage | |
| Tub Rotation | 3-position switch to operate tub clockwise, stop, & counter-clockwise | |
| Tub Speed | Model RCB93 electronic governor stabilizes engine load by adjusting tub rotation speed | |
| Tub Tilt | 3-position switch to raise, hold, & lower | |
| REAR COMMAND CONSOLE | ||
| Conveyor Lift | 3-position switch to raise, hold, & lower | |
| Conveyor Oscillation | 3-position switch for right, Hold, & left | |
| Conveyor Storage | 3-position switch to fold, hold or to unfold | |
| REQUIREMENTS FOR OPERATION TRUCK SPECIFICATIONS | ||
| Min. Truck Horsepower | 300 HP (223.7 kw) | |
| Min. Rear Axle(s) Capacity | 31,100 lbs (14,106.7 kg) | |
| Min. Front Axle Capacity | 9,650 lbs (4,377.17 kg) | |
| Recommended Rear Axle Suspension | Air ride with dump valve (to lower loading height) | |
| Frame Width | 34” +/- 1/2” | |
| Frame Material | Steel | |
| Fuel Tanks | Dual tanks are recommended
Minimum of 200 gal for truck and grinder combined use, if off-road fuel Minimum of (1) 150 gal and (1) 50 gal tanks if off-road fuel is not for Minimum of (1) 50 gal min if optional 211 gal truck style tank is selected |
|
| Fuel System Setup Methods | ||
| Method 1 – Tanks should be connected with a minimum of ½ in crossover fuel line with quarter-turn shutoff valves at each tank. Grinder and truck will share fuel source. DO NOT tee off of truck supply lines, this will un-prime the truck fuel system. This setup is recommended only if local laws allow off-road fuel use in this truck in this application. |
||
| Method 2 – Truck and grinder will each use a fuel tank dedicated to their separate operation. It is recommend that the tanks be connected with a crossover line with shutoff valve so the truck source tank can be used for a grinder reserve tank. |
||
| Method 3 – Truck is equipped with one tank for the truck engine on driver’s side. An optional 211-gallon tank will be installed on the passenger side. Adequate space will be required under truck cab for the tank. |
||
Similar Products
