Call us
Placeholder Image
H-1130 Tub Grinder

H-1130 Tub Grinder

Call for Pricing

Price

Make:
360 Yield Center
Model:
H-1130 Tub Grinder
Category:
Haybuster, New, Tub Grinders
WEIGHT
Total 14,500 lbs, (6,032.78 kg)
Hitch (with conveyor folded) 1,925 lbs. (873.2 kg)
TRANSPORT DIMENSIONS
Width 11′ 4′ (3.45 m)
Height 10′ 7″ (3.2 m)
Length 21′ 8″ (6.6 m)
OPERATING DIMENSIONS
Total Width 11′ 3″ (3.43 m)
Total Width, Tub Raised 12′ 6″ (3.81 m)
CHASSIS FEATURES
Towing Arrangement Clevis hitch
Tires 2) 16.5L X 16.1 (14 ply) High Flotation Implement Tires
Wheels (2) 16.1 X w14C – 8 Bolt, 6″ (15.24 cm) Pilot
Bearings Tapered roller
TUB FEATURES
Loading Height 9′ 2″ (2.79 m)
Tub Width at Flare 11′ 3″ (3.43 m)
Depth 50″ (1.27 m)
Tub Inside dia at Base 8′ 11″ (2.72 m)
Tub Wall Thickness 12 gauge (2.66 cm)
Tub Floor Thickness 10 gage (3.42 mm)
HAMMERMILL – HEAVY DUTY
Length 50″ (127 cm)
Diameter, Hammers Extended 26″ (66.04 cm)
Feed Opening 28” x 52” (71.1 cm X 132.08 cm)
Hammers HD-1/2″ (12.7cm) A.B. Hardened Steel, Swing
Number of Hammers 88
Hammer Rods 1-1/4″ (31.75 mm), Case Hardened Steel
Cylinder Plates HD Mills, 1/2″ (12.7 mm) thick X 15.75″ (40.01 cm)
Cylinder Shaft 3 1/2″ (8.98 cm) Stress Proof Steel
Bearings 3 1/4″ (8.26 cm) Pillow Block
Drive PTO through Multiple V-Belts, 1,000 RPM, 1-3/8″ dia. 21 spline shaft, or 1-3/4″ dia. 20 spline shaft
Screens 1/8″ (3.18 mm), 3/16″ (4.76 mm), or ¼” (6.35 mm) Thick and Various Hole Sizes from 1/8″ (3.18 mm) to 8″ (203.2 mm) – Must Order 2 Screens of Choice With Machine-Not Standard equipment
BELLY AUGERS
Type Twin 12″ (30.48 cm diameter – 4′-6″(1.37 m) long)
Drive Hydraulic
DISCHARGE CONVEYOR
Type Rubber Belt with Cleats
Drive Hydraulic
Drive & Idler Roller Type Rubber Lagged Drive, “Easy Clean” Idler
Length 26′ (7.92 m)
Width 24″ (60.69 cm)
Maximum Conveyor Lift Height 18′ 6″ (5.64 m) @ 40 Degree Incline Conveyor Lift
Conveyor Lift & Fold Hydraulic
OPERATOR CONTROLS
Tub Rotation 3 Position Hydraulic Valve; Clockwise, Stop, Counter Clockwise
Tub Speed DuraTech Model RCB93 Electronic Governor Stabilizes Engine Load by Adjusting Tub Rotation Speed
Conveyor Lift 3-Position Hydraulic Valves for Raise, Hold and Lower
Conveyor Fold 3-Position Hydraulic Valves for Fold, Hold and Unfold
Conveyor On/Off 2-Position Hydraulic Valves for Forward/Off
Tub Tilt Tractor Hydraulic
REQUIREMENTS FOR OPERATION TRACTOR
PTO Horsepower Required 200 HP (149.1 kw) to 315 HP (234.90 kw)
Min. Hydraulic Output 8 gpm at 1,500 psi (30.3 lpm. x 10,345 kPa)
Hydraulic Remote Controls 2- Double Acting Valves with Quick Coupler Outlets
Electrical 12 VDC
ELECTRIC MOTORS
300 HP (223.7 kw) Drive Motor, 10 HP (7.5 kw) Hydraulic Drive
Voltages Available: 460V-60Hz, 380V-50Hz, 380V-60Hz, 575V-60Hz
Electric Motors require three phase power – PLEASE CHECK WITH YOUR POWER SUPPLIER FOR THE PROPER VOLTAGE AND HZ FOR YOUR AREA
GRINDER
Hydraulic Reservoir Capacity 60 gallons (227.13 L) of Hydraulic Oil
(Mobile 423, CENEX Super HTB or Equivalent)
Mill Grate Kit This kit includes; 5 removable mill grates, and 6 removable slug bars for improved grinding performance in tough hay and stover

Similar Products

Placeholder Image

H-1130E Tub Grinder

WEIGHT Total 20,500 lbs (9,298.64 kg) Hitch (with convey...
Placeholder Image

H-1030 Tub Grinder

WEIGHT Total 13,300 lbs (6,032.78 kg) Hitch 1,925 lbs (873.17...
Placeholder Image

H-1000 Tub Grinder

WEIGHT Total 6,830 lbs. (3,098 kg) TRANSPORT DIMENSIONS ...
Placeholder Image

1155GL Tub Grinder

WEIGHT (DRY) Total 47,640 lbs (21,609 kg) Axle 27,900 lbs...
Placeholder Image

1155 Tub Grinder

WEIGHT (DRY) Total 34,100 lbs. (15,468 kg) Axle 27,900 lbs. (...
Placeholder Image

1150GL Tub Grinder

WEIGHT Total 32,350 lbs. (14,704.5 kg) TRANSPORT DIM...
Placeholder Image

1150 Tub Grinder

WEIGHT Total 24,850 lbs (11,272 kg) TRANSPORT DIMENSIONS ...