2660 Balebuster
Call for Pricing
Price
Make:
360 Yield Center
Model:
2660 Balebuster
Category:
Bale Processors, Haybuster, New
| WEIGHT | ||
| Total | 5,025 lbs (2279.3 kg) | |
| Tongue (Bale loader fully raised) | 1500 lbs (680.39 kg)) | |
| TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded) | ||
| Width | 8′ 4″ (2.54 m) | |
| Length | 14′ 11″ (4.55 m) | |
| Height | 11′ (3.35 m) | |
| WORKING DIMENSIONS (With 1 bale, deflector in spread position) | ||
| Width | 10′ 10″ (3.30 m) | |
| Length | 14′ 11″ (4.55 m)) | |
| Height | 11′ (3.35 m) | |
| WORKING DIMENSIONS (With 2 bales, deflector in spread position) | ||
| Width | 10′ 10″ (3.30 m) | |
| Length | 19′ 7″ (5.97 m) | |
| Height | 11′ (3.35 m) | |
| CHASSIS FEATURES | ||
| Towing Arrangement | Clevis type hitch. | |
| Jack Capacity | 5,000 lbs. (2,273 kg) | |
| Jack Travel | 10 in (25.4 cm) | |
| Bearing Type | Tapered Roller | |
| BALE LOADER | ||
| Type | Integral 2 Stage, Twin Boom Arms | |
| Bale Tines | Tubular Steel, 10° Float, 4 Position Width Adjustable | |
| Adjustable Hydraulic Cylinder | 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting | |
| BALE CONVEYOR | ||
| Type | 3 Roller Chains with Bolt-On Cross Slat | |
| Drive | Hydraulic Orbital Motor with Adjustable Flow Control | |
| Drive Shaft Bearings | 1-1/4″ (3.18 cm) | |
| Drive Shafts | 1-1/4″ (3.18 cm) | |
| BALE SHREDDER CHAMBER | ||
| Max. Bale Weight each | 2200 lbs. (998 kg) | |
| Rotor Length | 78 in. (1.98 m) | |
| Rotor Diameter (Flails extended) | 25 in. (63.5 cm) | |
| Rotor Bearing | Ball, 2″ (5.08 cm) | |
| Number of Flails | 30 | |
| Flail type | Heavy Duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging | |
| Number of Stripper Channels | 1 | |
| Number of Slug Bars | 5 | |
| Slug Bar | Single point, 9 Adjustment Settings Through a 180° Range | |
| Delivery | Right Hand Discharge | |
| Deflector | 6 Adjustment Settings through a 120 Degree Range | |
| Max. Horizontal Spread | Straw, up to 50 ft. (15.24 m) | |
| OPERATOR CONTROLS | ||
| Loader | 1 Tractor Double-Acting Hydraulic Valve | |
| Bale Conveyor | 1 Tractor Double-Acting Hydraulic Valve | |
| Bale Conveyor Speed | Conveyor Speed Control Valve | |
| Slug Bar | Hand Lever with 5 Settings | |
| Deflector | Hand Lever with 6 Settings | |
| REQUIREMENTS FOR OPERATION | ||
| PTO Horsepower Required | 65hp (48.5kw) to 155hp (115.6kw) | |
| PTO Type | 1000 RPM, 1-3/8 in. dia. PTO Shaft with 21 Splines with choice of Constant Velocity or Standard PTO shaft | |
| Min. Tractor Hydraulic Output | 8 gpm at 1500 psi (30.3 lpm x 10,345 kPa) | |
| Tractor Hydraulic Controls | 2 Double-Acting Control Valves with Quick Coupler Outlets | |
| Tractor Weight | Must be of equal or greater weight than that of a 2660 with 2 bales | |
| SMV Sign | Standard equipment | |
| Road Lights | Standard equipment | |
Similar Products
2800 Balebuster
Call for Pricing
WEIGHT
Total
7,300 lbs. (3,311 kg)
Tongue Weight (Bale loader...
107C – Seed Drill
Call for Pricing
WEIGHT
Total
4,200 lbs (1,905.1 kg)
TRANSPORT & WORKING D...
1150 Tub Grinder
Call for Pricing
WEIGHT
Total
24,850 lbs (11,272 kg)
TRANSPORT DIMENSIONS
...
1155 Tub Grinder
Call for Pricing
WEIGHT (DRY)
Total
34,100 lbs. (15,468 kg)
Axle
27,900 lbs. (...
