Tri-Axle Model

Available in 50′ length only. This trailer comes with a variety of options for your
specific commodities. Designed for customers who haul larger payloads and
prefer the look, style, and ease of access with the 15 degree front and rear
slopes.

STANDARD SPECIFICATIONS

APPLICATION

Recommended for transportation of agricultural and industrial bulk commodities.

KINGPIN SETTING

20”- Single I-beam with 3/8” steel flanges, 1/4” steel full-width pickup plate.

SIDE PANELS

Pre-painted white .048” and .063” aluminum, corrugated on 4” centers.
Lower Rails-Aluminum 7-11/16” high extrusion.
Side Posts- Aluminum extrusion 1-3/4” z-posts on 12” centers.
Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion.
Interior Lining-.048” aluminum.

REAR PANELS

Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts.

ACCESS SYSTEM

Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder.

NOSE PANELS

Smooth pre-painted white .063” aluminum.

FRONT CORNERS

3” x 4” rectangular tube, mill finish aluminum

NOSE ASSEMBLY

Extruded mill finish aluminum construction.
15 degree rearward slant assembly.

LIGHTS & WIRING

Side Lamps – Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D., (1) amber L.E.D. mid turn/marker lamp.
Nose Lamps – (2) High mounted amber L.E.D. lamps.
Standard High mounted Rear Frame Lamps – (5) red L.E.D. marker lamps on rear header.
Rear Tail Lamps- (6)-4” diameter, 7 diode L.E.D. lamps, grommet mounted.
Electrical-All weather-pack automotive style connections, sealed to prevent corrosion.
Common ground.
Conspicuity Tape: Red and white reflective tape mounted in line with bottom row of side marker lamps and full width across rear of trailer.
White reflective tape mounted on top corners of rear frame. (All lamps and wiring comply with FMVSS 108)

SUPPORT LEGS

Square legs, with roadside removable crank, low-profile 10″ square cushion foot shoe, 50,000 lbs. lift capacity – “No Lube” feature.
Located 110” on 50’ trailers.

HOPPERS

Side panels of .080” aluminum with side slope angle of 43.5 degrees.
Center and end panels of .100 aluminum with slope angle of 33 degrees.
Riveted split tub design.
Front and Rear End Slope Panels-.080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle.
Divider Panel – .080 aluminum supported by bulkhead crossmembers.

TRAPS

26″W x 54”L opening supported by robust structural trap frame.
The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal.
Hopper clearance 19”.

TRAP OPERATORS

Each trap is opened and closed by a manually operated 1″ diameter shaft connected through a U-joint to the double rack and pinion gears using a removable crank.
There are trap locks at each crankshaft.
The double rack and pinion gears drive at both sides of each trap plate.

SUSPENSION

23,000 lbs rated air ride suspension, 17” ride height, 71-1/2” track.
Suspension subframe long beams are 4” x 8” x 1/4” rectangular structural steel tubing and crosstubes are 4’ x 8” and 6” x 8” structural steel tubing. 10’8” on 50’.
Center axle is equal distance from front and rear axles.

HUB & DRUM

Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.

BRAKES

16-1/2” X 7” “Q+” quick change brakes with 5.5” autoslacks and 30/30 spring brake chambers, complying with FMVSS 121.
4 sensor, 2 modulator anti-lock brake system with constant power supplied by center auxiliary pin.
Exceeds the minimum requirements of FMVSS 121,S5.5

WHEELS