STANDARD SPECIFICATIONS: B-TRAIN LEAD UNIT
38′ TRIAXLE – (28’6″ Hopper Body Assembly – 38′ Overall length)
KINGPIN SETTING: 24″
WALL PANELS
- Pre-painted white .048″ and .063″ aluminum, corrugated on 4″ centers.
ACCESS
- Aluminum ladders, handholds, and platforms front and rear
FRONT CORNERS
- 6″ radius, mill finish aluminum (color optional).
LIGHTS & WIRING
- CMVSS-108 w/weather-pack automotive style connections w/L.E.D. lights
SUPPORT LEGS
- 50,000 lb. lift capacity with roadside removable crank, low profile shoe.
HOPPERS
- Two piece .125 aluminum formed tubs with 35.8 degree side slope angle and 33 degree end slope angle.
- Single tub design.
- Both doors open from the center out.
- End slope panels-.080″ aluminum supported by aluminum channel with Za shaped member, 33 degree slope angle. Divider Panel – .080 aluminum.
TRAPS
- 30″W x 22″L Hopper clearance 25″.
SUSPENSION & AXLES
- 23,000 lb. rated air ride suspension 5” diameter axle with 49″ axle spacing lead.
BRAKES
- 16-1/2″ X 7″ complying with CMVSS 121, Meritor/Wabco 4 sensor, 2 modulators (which exceed the minimum requirements of CMVSS 121, S5.5.)
WHEELS
- Twelve (12) 24.5 x 8.25 white steel disc painted, hub piloted.
TIRES
- Twelve (12) 11R24.5 Bridgestone R195F radials.
TARP
- 18 oz. roll tarp with rear mounted crank.
TARP BOWS
- Five (5) – 9″ rise galvanized steel arch type.
PAINT
- Black protective metal coating on all steel parts.
REAR FRAME
- Stainless steel and aluminum construction.
- 15 degree forward slant.
FIFTH WHEEL
- Holland FW7040 Kompensator with Progressive grease manifold.
STANDARD SPECIFICATIONS: B-TRAIN PUP UNIT
28’6″ TANDEM AXLE – (28’6″ Overall Length)
KINGPIN SETTING: 20″
WALL PANELS
- Pre-painted white .048″ and .063″ aluminum, corrugated on 4″ centers.
ACCESS
- Aluminum ladders, handholds, and platforms front and rear.
FRONT CORNERS
- 3″ x 4″ rectangular tube, mill finish aluminum
NOSE ASSEMBLY
- Extruded mill finish aluminum construction.
- 15 degree rearward slant.
LIGHTS & WIRING
- CMVSS-108 w/weather-pack automotive style connections w/L.E.D. lights
SUPPORT LEGS
- 50,000 lbs. lift capacity with roadside removable crank, low-profile shoe.
HOPPERS
- Two piece .125″ aluminum formed tubs with 35.8 degree side slopes and 33 degree end slopes.
- Single tub design.
- Both hopper doors open from the center out.
- End slope panels-.080″ aluminum supported by aluminum channel with Z shaped member.
- Divider Panel – .080 aluminum.
TRAPS
- 30″W x 22″L Hopper clearance 25″.
SUSPENSION & AXLES
- 23,000 lb. rated air ride suspension 5″ diameter axle with 10’1″ total axle spread.
- Center axle is equal distance from front and rear axles.
BRAKES
- 16-1/2″ X 7″ complying with CMVSS 121.
- Meritor/Wabco 4 sensor, 2 modulator which exceeds the minimum requirements of CMVSS 121, S5.5.
WHEELS
- Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.
TIRES
- Eight (8) 11R24.5 Bridgestone R195F radials.
TARP
- 18 oz. black roll tarp with front mounted crank.
TARP BOWS
- Five (5) – 9″ rise galvanized steel arch type.
PAINT
- Black protective metal coating on all steel parts.
Contact your nearest Canadian Authorized Timpte Dealer or:
Timpte Industries
1827 Industrial Drive
David City, Nebraska, 68632 U.S.A.
(402) 367-3056
[email protected]
*NOTE: All Dimensions are + or – ¼”. All Specification subject to change Timpte reserves the right to change design specifications without notice contained herein is general in nature and is not intended for specific applications.
WARRANTY: See Timpte Warranty Card
Similar Products
